TI TPS767D301PWP Dual Low Dropout Voltage Regulator Adj./Fixed HTSSOP28
TI TPS767D301PWP Dual Low Dropout Voltage Regulator Adj./Fixed HTSSOP28
TI TPS767D301PWP Dual Low Dropout Voltage Regulator Adj./Fixed HTSSOP28
RS Components Part # 620-1697
Manufactured by Texas Instruments - Part # TPS767D301PWP - 28-Pin HTSSOP SMD Package
1A, 1.5 to 5.5V ±2%, 5.07W
DUAL-OUTPUT LOW-DROPOUT VOLTAGE REGULATORS
Features
- Dual Output Voltages for Split-Supply Applications
- Output Current Range of 0mA to 1.0A per Regulator
- Fast-Transient Response
- 2% Tolerance Over Load and Temperature
- Dropout Voltage Typically 350mV at 1A
- Ultra Low 85µA Typical Quiescent Current
- 1µA Quiescent Current during Shutdown
- Dual Open-Drain Power-On Reset with 200ms Delay for Each Regulator
- 28-Pin PowerPAD TSSOP Package
- Thermal Shutdown Protection for Each Regulator
Description
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (350mV typically at an output current of 1A for the TPS767D325) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85µA over the full range of output current, 0mA to 1A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to ¬EN (enable) shuts down the regulator, reducing the quiescent current to 1µA at TJ = +25°C.