AD8116JSTZ 200 MHz 16 x 16 Buffered Video Crosspoint Switch 128-Pin LQFP
AD8116JSTZ 200 MHz 16 x 16 Buffered Video Crosspoint Switch 128-Pin LQFP
AD8116JSTZ 200 MHz 16 x 16 Buffered Video Crosspoint Switch 128-Pin LQFP
RS Components Part # 708-9570
Manufactured by Analog Devices - Part # AD8116JSTZ - 128-Pin LQFP Package
PRODUCT DESCRIPTION
The AD8116 is a high speed 16 x 16 video crosspoint switch matrix. It offers a –3 dB signal bandwidth greater than 200 MHz and channel switch times of 60 ns with 0.1% settling. With –70 dB of crosstalk and –105 dB of isolation (@ 5 MHz), the AD8116 is useful in many high speed applications. The differential gain and differential phase errors of better than 0.01% and 0.01° , respectively, along with 0.1 dB flatness out to 60 MHz make the AD8116 ideal for video signal switching.
The AD8116 includes output buffers that can be placed into a high impedance state for paralleling crosspoint outputs so that off channels do not load the output bus. It operates on voltage supplies of ±5 V while consuming only 90 mA of idle current. The channel switching is performed via a serial digital control that can accommodate “daisy chaining” of several devices.
The AD8116 is packaged in a 128-lead LQFP package occupying only 0.36 square inches, and is specified over the commercial temperature range of 0°C to 70°C.
FEATURES
- Large 16 x 16 High Speed Nonblocking Switch Array
- Switch Array Controllable via an 80-Bit Serial Word
- Serial Data Out Allows “Daisy Chaining” of Multiple AD8116s to Create Large Switch Arrays Over 256 x 256
- Complete Solution
Buffered Inputs
16 Individual Output Amplifiers
Drives 150 Loads - Excellent Video Performance
60 MHz 0.1 dB Gain Flatness
0.01% Differential Gain Error (RL = 150Ω )
0.01 Differential Phase Error (RL = 150Ω ) - Excellent AC Performance
200 MHz –3 dB Bandwidth
300 V/s Slew Rate - Low Power of 900 mW (3.5 mW per Point)
- Low All Hostile Crosstalk of –70 dB @ 5 MHz
- Output Disable Allows Direct Connection of Multiple Device Outputs
- Chip Enable Allows Selection of Individual AD8116s in Large Arrays (or Parallel Programming of AD8116s)
- Reset Pin Allows Disabling of All Outputs (Connected Through a Capacitor to Ground Provides “Power-On” Reset Capability)
- 128-Lead LQFP Package (14 mm x 14 mm)
APPLICATIONS
Routing of High Speed Signals Including:
Composite Video (NTSC, PAL, S, SECAM, etc.)
Component Video (YUV, RGB, etc.)
3-Level Digital (HDB3)
Video on Demand
Ultrasound
Communication Satellites
