Toshiba 74HC4052AP Dual 4-channel analog mux/demux DIL16

Manufactured by Toshiba - DIP16 through hole package - 74HC4052AP (CD4052)

Description

The 74HC4052AP is a dual 4-channel analog multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active LOW enable input (¬E). Both multiplexers/demultiplexers contain four bidirectional analog switches, each with one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common input/output (nZ). With ¬E LOW, one of the four switches is selected (low-impedance ON-state) by S1 and S2. With ¬E HIGH, all switches are in the high-impedance OFF-state, independent of S1 and S2. If break before make is needed, then it is necessary to use the enable input.
V_DD and V_SS are the supply voltage connections for the digital control inputs (S1 and S2, and E). The V_DD to V_SS range is 3 V to 15 V. The analog inputs/outputs (nY0 to nY3, and nZ) can swing between V_DD as a positive limit and V_EE as a negative limit. V_DD - V_EE may not exceed 15 V. Unused inputs must be connected to V_DD, V_SS, or another input. For operation as a digital multiplexer/demultiplexer, V_EE is connected to V_SS (typically ground). V_EE and V_SS are the supply voltage connections for the switches.

Features

• Wide Analog Input Voltage Range: ±5-V Maximum
•  Low ON-Resistance
  – 70-Ω Typical (VCC – VEE = 4.5 V)
  – 40-Ω Typical (VCC – VEE = 9 V)
•  Low Crosstalk Between Switches
•  Fast Switching and Propagation Speeds
•  Break-Before-Make Switching
•  Wide Operating Temperature Range: –55°C to +125°C
•  74HC Types
  – Operation Control Voltage: 2 V to 6 V
  – Switch Voltage: 0 V to 10 V
  
  

Applications

Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating